Flight Control Systems
Flight Controls
Aircraft flight control systems consist of primary and secondary systems.
The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight.
Wing flaps, leading edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces.
Primary Flight Controls
Aircraft control systems are carefully designed to provide adequate responsiveness to control inputs while allowing a natural feel.
At low airspeeds, the controls usually feel soft and sluggish, and the aircraft responds slowly to control applications.
At higher airspeeds, the controls become increasingly firm and aircraft response is more rapid.
Movement of any of the three primary flight control surfaces (ailerons, elevator or stabilator, or rudder), changes the airflow and pressure distribution over and around the airfoil.
These changes affect the lift and drag produced by the airfoil/control surface combination, and allow a pilot to control the aircraft about its three axes of rotation.
Design features limit the amount of deflection of flight control surfaces.
For example, control-stop mechanisms may be incorporated into the flight control linkages, or movement of the control column and/or rudder pedals may be limited.
The purpose of these design limits is to prevent the pilot from inadvertently overcontrolling and overstressing the aircraft during normal maneuvers.
Control surface inputs cause movement about the three axes of rotation.
The types of stability an aircraft exhibits also relate to the three axes of rotation.
'PHAK' 카테고리의 다른 글
| PHAK Chapter 6-6 Differential Ailerons (0) | 2021.08.06 |
|---|---|
| PHAK Chapter 6-5 Adverse Yaw (0) | 2021.08.05 |
| PHAK Chapter 6-4 Ailerons (0) | 2021.08.04 |
| PHAK Chapter 6-2 Introduction (0) | 2021.08.02 |
| PHAK Chapter 6-1 Flight Controls (0) | 2021.08.01 |
댓글