반응형 스톨4 AFH Chapter 4-12 Stall Characteristics Stall Characteristics Different airplane designs can result in different stall characteristics. The pilot should know the stall characteristics of the airplane being flown and the manufacturer’s recommended recovery procedures. Factors that can affect the stall characteristics of an airplane include its geometry, CG, wing design, and high-lift devices. Engineering design variations make it impos.. 2021. 7. 31. AFH Chapter 4-10 Stall Recognition Stall Recognition A pilot must recognize the flight conditions that are conducive to stalls and know how to apply the necessary corrective action. This level of proficiency requires learning to recognize an impending stall by sight, sound, and feel. Stalls are usually accompanied by a continuous stall warning for airplanes equipped with stall warning devices. These devices may include an aural a.. 2021. 7. 29. AFH Chapter 4-9 Stalls Stalls A stall is an aerodynamic condition which occurs when smooth airflow over the airplane’s wings is disrupted, resulting in loss of lift. Specifically, a stall occurs when the AOA—the angle between the chord line of the wing and the relative wind—exceeds the wing’s critical AOA. It is possible to exceed the critical AOA at any airspeed, at any attitude, and at any power setting. For these r.. 2021. 7. 28. AFH Chapter 4-5 Slow Flight Slow Flight Slow flight is when the airplane AOA is just under the AOA which will cause an aerodynamic buffet or a warning from a stall warning device if equipped with one. A small increase in AOA may result in an impending stall, which increases the risk of an actual stall. In most normal flight operations the airplane would not be flown close to the stall-warning AOA or critical AOA, but becau.. 2021. 7. 24. 이전 1 다음 반응형
