PHAK Chapter 6-14 V-Tail

V-Tail

The V-tail design utilizes two slanted tail surfaces to perform the same functions as the surfaces of a conventional elevator and rudder configuration. 

 

The fixed surfaces act as both horizontal and vertical stabilizers.

 

The movable surfaces, which are usually called ruddervators, are connected through a special linkage that allows the control wheel to move both surfaces simultaneously. 

 

On the other hand, displacement of the rudder pedals moves the surfaces differentially, thereby providing directional control. 

 

When both rudder and elevator controls are moved by the pilot, a control mixing mechanism moves each surface the appropriate amount. 

 

The control system for the V-tail is more complex than the control system for a conventional tail. 

 

In addition, the V-tail design is more susceptible to Dutch roll tendencies than a conventional tail, and total reduction in drag is minimal.

 

V-Tail

phak6_0161_v_tail.mp3

0.31MB

phak6_0162.mp3

0.20MB

phak6_0163.mp3

0.28MB

phak6_0164.mp3

0.25MB

phak6_0165.mp3

0.26MB

phak6_0166.mp3

0.21MB

phak6_0167.mp3

0.27MB