반응형 flap3 PHAK Chapter 6-16 Slotted Flap Slotted Flap The most popular flap on aircraft today is the slotted flap. Variations of this design are used for small aircraft, as well as for large ones. Slotted flaps increase the lift coefficient significantly more than plain or split flaps. On small aircraft, the hinge is located below the lower surface of the flap, and when the flap is lowered, a duct forms between the flap well in the win.. 2021. 8. 16. PHAK Chapter 6-15 Secondary Flight Controls Secondary Flight Controls Secondary flight control systems may consist of wing flaps, leading edge devices, spoilers, and trim systems. Flaps Flaps are the most common high-lift devices used on aircraft. These surfaces, which are attached to the trailing edge of the wing, increase both lift and induced drag for any given AOA. Flaps allow a compromise between high cruising speed and low landing s.. 2021. 8. 15. PHAK Chapter 6-3 Flight Control Systems Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance chara.. 2021. 8. 3. 이전 1 다음 반응형
